You’re here: Shop / Strength / Plate Loaded
Citadel Strength Hip Thrust
BULK SAVINGS & SPECIAL PRICING
Contact us for a quotation
Commercial leasing - Find out more
Free shipping
Price match promise
New for 2027
Exclusively available from CYC Fitness
Description
The Citadel Hip Thrust was designed to be the most stable and comfortable Hip Thrust on the market. It features a full length back pad that supports the lumbar spine to remove the abs and stabilization from being the limiting factor to allow the glutes to be trained to failure. We use a one piece injection molded foam pad over a seatbelt as seatbelt driven hip thrusts are impossible to load heavily without discomfort and the belt digging into your hips. The extra long arm means you don't have to load a lot of weight for the machine to be very heavy. The slanted footplate allows external rotation of the femur to fully shorten glute max as well as increases stability. The center mechanism rotates freely during the exercise allowing the weight to sit perfectly over the hips no matter how much hip flexion you have.
The construction of the hip thrust includes 75x75 solid RHS steel, bearings rated to over 2 tons and indexing pins rated to over 2 tons, to deliver a hip thrust that can handle any weight your members can use. People from 142cm to 203cm (4 foot 8 to 6 foot 8) can comfortably use our hip thrust due to the adjustability.
- Full-length back pad for lumbar support
- Rotating hip pad to ensure maximum comfort
- Rotating back pad for maximum stability throughout the exercise
- Auto unrack feature
- Handle for extra stability
- Angled footplate to bias external rotation of the femur to further shorten the glutes with a supergrip powder coating
- Multiple band pegs
- Adjustable centre pad to ensure ease of use
- Long Moment arm to make loading and unloading easy
- 100% made in Australia out of Australian steel
- Multiple frame colour and upholstery options are available
- 1 Piece injection molded pad to maximum comfort and durability
- Front Weight storage horn
Product features
Your colour, your upholstery.
Every frame is powder coated to order, so the colour is genuinely yours. Match your fit-out, your branding, or a code you send us.
Coated to any RAL code by Interpon, Dulux and Oxytech, with translucent finishes by Eastwood. Tell us the code and we will match it.
Colour previews are AI-generated renders shown on one photograph, and are a guide only, and the finish on a built machine can differ. Ask us for a physical sample before you commit a floor to a colour. Refer to the attached brochure to see the machine colours.
Marine vinyl. Sailmaker's thread.
The upholstery is cut and covered by a trimmer minutes from the workshop, so the vinyl, the thread and the stitch are specified per machine the same way the frame colour is. We use Novatex Aspen, a marine-grade vinyl built for boat decks and commercial floors, stitched with Coats Dabond v138, the UV-treated bonded polyester that holds sails together. Sweat, sunlight and a chlorine wipe-down are the easy part of its working life.
Three stitch finishes. Trimmed to order.
- Double stitch - A pair of rows either side of every seam. This is what is on the machines in our photography.
- Single stitch - One row of stitching sewn along each seam. The diamond reads, the thread does not shout.
- No stitch - A plain panel. No seams, no thread: the quietest of the three, and the easiest to wipe down.
Vinyl options. Novatex aspen. Choose from 28 colours.
- 100,000+ Martindale cycles, no significant wear
- FireFlame resistance tested to AS 1530.3
- UVStabilised for outdoor Australian conditions
- HygieneAnti-microbial and anti-bacterial: inhibits mould and mildew
- ConstructionPVC on a double-knit backing, stain-resistant finish
- MaterialThree-year warranty from Novatex, stocked in Australia
Thread: coats dabond V138.
- Sizev138 bonded polyester, metric 18, 1500 m spools
- UVUV treated: the thread used on sails, boat tops and awnings
- MarineHolds in sun, salt water and wind; fast to chlorine bleach
- StitchNo stitch, single or double; tonal or contrast to the vinyl
Specification
Seven of the Aspen colours also come in a coarser pebble grain, and the thread can be tonal or contrast in any of the three stitch finishes. Screen colour is a guide only, so ask us for a physical swatch before you commit a whole floor to one.
Colour previews are AI-generated renders shown on one photograph, and are a guide only, and the finish on a built machine can differ. Ask us for a physical sample before you commit a floor to a colour.
- Length: 195cm
- Width: 110cm
- Height 140cm
- Weight: 250kg
- User Range: 142-203cm (4'8" - 6'8")
- Steel Frame: Australian RHS box section
- Bearings and Pins: Rated beyond 2 tonnes
- Padding: One-piece injection mould
- Pads: Rotating hip and back
- Loading: Plate loaded, extended arm
- Finish: Powder coat, any upholstery
Warranty
20yr structural / 7yr moving parts.
Commercial Leasing
Benefits
- Fixed rates for the duration of agreement
- Major tax benefits - each payment Is 100% tax deductible
- The equipment can be earning your next payment from day one
- No need to have bank loans, overdrafts or pay cash
- Fast application turnaround
- Spread the cost of your equipment purchase
- Protect existing lines of credit and preserve cash flow for business growth
Talk to our team
Whether you're opening a new gym, expanding your facility
or upgrading your exercise equipment, speak to
our commercial gym specialists today.
01691 888 050