You’re here: Shop / Strength / Plate Loaded
Precor Adjustable Cable Cross, Silver frame
Free shipping on orders over £250Description
The 407 Adjustable Cable Crossover is a stand-alone cable crossover machine with two adjustable high/low pulley stations and a connector that offers dual chin-up bar options. The Crossover adjusts quickly to give users a wide range of exercise options.
Product features
- Upholstery: Premium-quality upholstery with Beauty guard protective topcoat finish. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Double-layer slipcover in appropriate high wear areas. Double stitching on all seams.
- Bolts: Grade 5 black zinc in most applications.
- Cable Routing: Wherever possible, redirection pulleys are used to route cables close to frame to minimize chance of external interference.
- Handles: Slip-resistant rubber sleeve with machined alloy end-cap.
- Weight Stack: On most Selectorized units, the weight stack is elevated 5 inches to facilitate user pin selection from seated position.
- Selector Plates: Each selector plate entirely precision machined on all surfaces. Top plate has replaceable Igus precision self-lubricating bushings. Black painted protective finish.
- Pivot Points and Joints: Pillow block or flange-mount motor-grade rotary bearings or sleeve bearings utilizing either oil-impregnated bronze bushings or pre-lubricated Igus nylon bushings.
- Pulleys and Cables: Glass-fibre-reinforced nylon pulleys with precision motor-grade ball bearings. 3/16-inch (7x19) aircraft cable coated with black pressure-extruded nylon to 1/4 inch, or 1/8 inch coated to 3/16 inch.
- Frame and Finish: 11-gauge (.120") and 7-gauge (.188") 2x4-inch bent electro weld steel tubing. Minimum of 3 standard bolt tabs on appropriate units. Abrasive grit pre-finish is followed by electrostatically applied, heat-cured powder coat.
- Guide Rods: Guide rods are precision centreless ground, polished, with corrosion-resistant plating for smooth operation and retardation of rust.
- Bearings and Pivot Points: Oversized linear reticulating ball bearings are self-aligning, sealed and running on casehardened shafts.
Specification
- Weight Stack: Standard 150 lb / 68 kg
- Options: Rubber Feet Standard Shroud
- Weight Stack Heavy: 200 lb / 91 kg
- Weight Stack: Depicted weight stack shrouds are not available.
- Standard Upholstery Colours: All Spice, American Beauty, Black, Blue Jay, Burgundy, Deep Clay, Grey, Hunter Green, Navy, New Purple, Regal Blue, and Slate.
- Standard Frame Colours: Gloss Metallic Silver, Metallic Ash, Desert Bronze, Black Magic Gloss, Gloss White, Black Pearl.
- Equipment Dimensions and Weight
- Length: 176 inches / 447 cm
- Width: 43 inches / 109 cm
- Height: 91 inches / 231 cm
- Equipment Weight: 870 lb / 396 kg
